1.1.1 Test Chamber
Test chamber material stainless steel, 1.4301, surface III D polished
Material of test space floor 1.4404, matt surface
Test area dimensions height approx. 750 mm
width approx. 580 mm
width between
shelf supports approx. 540 mm
depth approx. 450 mm
Volume of test chamber approx. 190 l
Max. loading 130 kg
Max. loading of test chamber floor 50 kg distributed load
Max. load per shelf 30 kg distributed load
Max. load of shelf supports 80 kg
1.1.2 Exterior Housing
Material double-coated galvanised steel sheet
Dimensions of housing height approx. 1805 mm
width approx. 780 mm
depth approx. 1385 mm
Overall dimensions height 1 approx. 1805 mm
width 1 approx. 875 mm
depth 1 approx. 1545 mm
Finish two-coloured, powder coated
corpus grey-white (RAL 9002)
front violet-blue (RAL 5000)
Door hinged on the left, one-hand-operation, lockable, optimum contact pressure
Feet adjustable, vibration absorbing
1 The required clearances can be reduced by dismounting components
1.2 Installation Drawing
• Stainless steel port included in basic design
R1: approx. 125 mm
L1: approx. 50 mm
R21 ... further installation position right
L21 ... further installation position left
D11 installation position in ceiling
1. Main switch panel
2. Colour touch display1
3. Colour touch display 3,5
4. Condensation drain
5. Power supply cable length approx. 3,5 m
6. Door without window
8. Cooling water supply1
9. Cooling water drain1
10. Water supply (demineralised, H2O)
13. Slotted port1
14. Compressed air connection 1
# Width between shelf supports
$ at least 200 mm, 700 mm are required for services according to VDE standard